View MN15G0402_292133.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN15G0202 , MN15G0402
Type ROM (x8-bit) x RAM (x4-bit) x Package (Old Package) Number of Instructions Minimum Instruction Execution Time
MN15G0202 2K 128 SOP020-P-0300D *Pb free (SOP020-P-0300) 103 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.0 V to 5.5 V, 4 MHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * IRQ1 * IRQ2 * IRQ3 Timer counter 2 : 8-bit x 1 (pulse output, PWM output) Clock source ********************* 1/2, 1/8, 1/32, 1/128 of system clock; 1/1, 1/4, 1/16, 1/64 of OSC oscillation clock Timer counter 3 : 8-bit x 1 (pulse output, high-functional PWM output) Clock source ********************* 1/2 of system clock; 1/1, 1/26, 1/214 of OSC oscillation clock Timer counter 2 can be cascade-connected. Watchdog timer MN15G0402 4K 128
Interrupts Timer Counter
I/O Pins
I/O
15
* Common use : 11 * Specified pull-up resistor available : 7 (software programmable) * Specified output architecture available : Nch open drain / push-pull : 11 (software programmable) * 4-ch. LED direct drive available (15 mA / 1.0 V)
A/D Inputs Zero-Cross Input Special Ports Notes Electrical Characteristics
Supply current
10-bit x 4-ch. (with S/H) 1 Buzzer output (1 kHz, 2 kHz, 4 kHz : fosc = at 4 MHz) Auto-Reset circuit selectable (none, circuit 1, circuit 2) (mask option)
Limit Parameter Symbol IDD1 Condition min fosc = 8 MHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) ACZ = 1/2 VDD, Ta = 25C ACZ = 1/2 VDD, Ta = -40C to +85C Ta = 25C Ta = -40C to +85C 4.0 typ 1.5 1.2 0.3 3.0 max 3.0 2.5 0.6 10.0 20.0 1.0 5.0 8.0 mA mA mA A A A A A Unit
Operating supply current
IDD2
Supply current at HALT
IDD3 IDD4
Supply current at SOTP
IDD5 IDD6 IDD7
Auto reset current consumption
IDD8
(Ta = -40C to +85C, VDD = 5.0 V, VSS = 0 V)
214
MAC00002BEM
MN15G0202 , MN15G0402
Pin Assignment
VDD OSC1 OSC2 VSS P00 P01 P02 P03 PWMO0 / P10 PWMO1 / P11 1 2 3 4 5 6 7 8 9 10
MN15G0202 MN15G0402
(
20 19 18 17 16 15 14 13 12 11 P32 / TCO / BZ / key2 P31 / NIRQ / ACZ / key1 P30 / NSYNC / key0 NRST P23 / AD3 P22 / AD2 P21 / AD1 P20 / AD0 P13 / PWMO3 P12 / PWMO2
) : Old Package
SOP020-P-0300D *Pb free (SOP020-P-0300)
Support Tool
In-circuit Emulator EPROM Built-in Type
Note) * Because of a special writing system, only a particular writer model manufactured by Data I/O is applicable. * The mask option applies only to no auto reset circuit. (No other options are set.) PX-ICE1500 + PX-PRB15G0202 / 0402-SOP020-P-0300 Type ROM (x 8-bit) RAM (x 4-bit) Minimum instruction execution time MN15GP0402 [ES (Engineering Sample) available] 4K 128 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.3 V to 5.5 V, 4 MHz) Package (Old Package) SOP020-P-0300D *Pb free (SOP020-P-0300)
MAC00002BEM
215
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN15G0402

	To Download MN15G0402 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .